TODENTJ-25-03-2019_TODENTJ-9-473 1553505939 Bentham Open doi@benthamopen.net Bentham Open The Open Dentistry Journal TODENTJ 1874-2106 12 31 2015 9 1 Elie E. Daou Recent advances in ceramics have greatly improved the functional and esthetic properties of restorative materials. New materials offer an esthetic and functional oral rehabilitation, however their impact on opposing teeth is not welldocumented. Peer-reviewed articles published till December 2014 were identified through Pubmed (Medline and Elsevier). Scientifically, there are several methods of measuring the wear process of natural dentition which enhances the comparison of the complicated results. This paper presents an overview of the newly used prosthetic materials and their implication on antagonist teeth or prostheses, especially emphasizing the behavior of zirconia restorations. 12 31 2015 473 481 TODENTJ-9-473 1 10.2174/crossmark_policy opendentistryjournal.com benthamopen.com true Peer Reviewed Single blind Checked with iThenticate 2014-12-24 2015-9-10 2015-9-29 2015-12-31 https://creativecommons.org/licenses/by/4.0/legalcode 10.2174/1874210601509010473 1553505939 https://opendentistryjournal.com/VOLUME/9/PAGE/473/ https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.pdf https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.pdf https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.pdf https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.pdf https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.pdf https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.pdf https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.pdf https://opendentistryjournal.com/contents/volumes/V9/TODENTJ-9-473/TODENTJ-9-473.xml J. Esthet. Restor. Dent Donovan T.E. 21 4 2009 10.1111/j.1708-8240.2008.00222.x Donovan TE. Porcelain-fused-to-metal (PFM) alternatives J Esthet Restor Dent 2009; 21 (1) : 4-6. Int. J. Prosthodont Näpänkangas R. 21 307 2008 Näpänkangas R, Raustia A. Twenty-year follow-up of metal-ceramic single crowns: a retrospective study Int J Prosthodont 2008; 21 (4) : 307-11. J. Dent. Res Silva N.R. 89 1051 2010 10.1177/0022034510375826 Silva NR, Bonfante EA, Zavanelli RA, Thompson VP, Ferencz JL, Coelho PG. Reliability of metalloceramic and zirconia-based ceramic crowns J Dent Res 2010; 89 (10) : 1051-6. J. Prosthet. Dent McLean J.W. 85 61 2001 10.1067/mpr.2001.112545 McLean JW. Evolution of dental ceramics in the twentieth century J Prosthet Dent 2001; 85 (1) : 61-6. J. Dent Owen A. ••• 35416 2007 Owen A, Maquis PM. Fleming Garry JP. Resin strengthening of dental ceramics- The impact of surface texture and silane J Dent 2007; ••• : 35416-24. Dent. Mater Zarone F. 27 83 2011 10.1016/j.dental.2010.10.024 Zarone F, Russo S, Sorrentino R. From porcelain-fused-to-metal to zirconia: clinical and experimental considerations Dent Mater 2011; 27 (1) : 83-96. J. Prosthet. Dent Raigrodski A.J. 86 520 2001 10.1067/mpr.2001.120111 Raigrodski AJ, Chiche GJ. The safety and efficacy of anterior ceramic fixed partial dentures: A review of the literature J Prosthet Dent 2001; 86 (5) : 520-5. Dent. Mater Chen Y.M. 24 1506 2008 10.1016/j.dental.2008.03.010 Chen YM, Smales RJ, Yip KH, Sung WJ. Translucency and biaxial flexural strength of four ceramic core materials Dent Mater 2008; 24 (11) : 1506-11. J. Eur. Ceram. Soc Holand W. 29 1291 2009 10.1016/j.jeurceramsoc.2008.08.023 Holand W, Ritzberger V, Appel C, et al. Future perspectives of biomaterials for dental restoration J Eur Ceram Soc 2009; 29 : 1291-7. Dent. Mater Xiao-ping L. 18 216 2002 10.1016/S0109-5641(01)00026-4 Xiao-ping L, Jie-mo T, Yun-long Z, Ling W. Strength and fracture toughness of MgO-modified glass infiltrated alumina for CAD/CAM Dent Mater 2002; 18 (3) : 216-20. J. Prosthet. Dent Gemalmaz D. 87 189 2002 10.1067/mpr.2002.120653 Gemalmaz D, Ergin S. Clinical evaluation of all-ceramic crowns J Prosthet Dent 2002; 87 (2) : 189-96. J. Prosthet. Dent Goodacre C.J. 90 31 2003 10.1016/S0022-3913(03)00214-2 Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JY. Clinical complications in fixed prosthodontics J Prosthet Dent 2003; 90 (1) : 31-41. 10.1016/j.dental.2010.11.005 Albrecht T, Kirsten A, Kapperta HF, Fischerb H. Fracture load of different crown systems on zirconia implant abutments Pauli C. Flexural strength of 3-unit PFM and all ceramic maxillar posterior bridges ZWR 1996; 105 (11) : 526 ff. . J. Contemp. Dent. Pract Al-Wahadni Ahed M. 10 1 2009 Al-Wahadni Ahed M, Husey DL. Grey Nicholas, Hatamleh Muhanad M. Fracture resistance of Aluminium Oxide and lithium disilicate -based crowns using different luting cements: An in-vitro study J Contemp Dent Pract 2009; 10 (2) : 1-10. Optic Engine Klein C.A. 48 113401 2009 10.1117/1.3265716 Klein CA. Characteristic strength, Weibull modulus, and failure probability of fused silica glass Optic Engine 2009; 48 (11) : 113401. J. Dent Schmitter M. 40 154 2012 10.1016/j.jdent.2011.12.007 Schmitter M, Mueller D, Rues S. Chipping behaviour of all-ceramic crowns with zirconia framework and CAD/CAM manufactured veneer J Dent 2012; 40 (2) : 154-62. Int. J. Prosthodont Tinschert J. 14 231 2001 Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study Int J Prosthodont 2001; 14 (3) : 231-8. Biomed. Mater Morrmann W.H. 20 113 2013 Morrmann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness J Mechan Behav Biomed Mater 2013; 20 : 113-25. J. Prosthet. Dent Galindo M.L. 106 23 2011 10.1016/S0022-3913(11)60089-9 Galindo ML, Sendi P, Marinello CP. Estimating long-term survival of densely sintered alumina crowns: a cohort study over 10 years J Prosthet Dent 2011; 106 (1) : 23-8. J. Prosthet. Dent Segal B.S. 85 544 2001 10.1067/mpr.2001.115180 Segal BS. Retrospective assessment of 546 all-ceramic anterior and posterior crowns in a general practice J Prosthet Dent 2001; 85 (6) : 544-50. McLaren EA, White S. Glass-infiltrated zirconia/alumina-based ceramic for crowns and fixed partial dentaures. Prac Periodont Aesthet Dent 1999; 11 (985-94 quiz 996.) Int. J. Prosthodont Yoshinari M. 7 329 1994 Yoshinari M, Dérand T. Fracture strength of all-ceramic crowns Int J Prosthodont 1994; 7 (4) : 329-38. J. Esthet. Restor. Dent Raigrodski A.J. 18 117 2006 10.1111/j.1708-8240.2006.00003.x Raigrodski AJ. Materials for all-ceramic restorations J Esthet Restor Dent 2006; 18 (3) : 117-8. J. Dent Manicone P.F. 35 819 2007 10.1016/j.jdent.2007.07.008 Manicone PF, Rossi Iommetti P, Raffaelli L. An overview of zirconia ceramics: basic properties and clinical applications J Dent 2007; 35 (11) : 819-26. Dent. Mater Yang B. 24 508 2008 10.1016/j.dental.2007.04.013 Yang B, Lange-Jansen HC, Scharnberg M, et al. Influence of saliva contamination on zirconia ceramic bonding Dent Mater 2008; 24 (4) : 508-13. J. Prosthet. Dent Yilmaz H. 98 120 2007 10.1016/S0022-3913(07)60045-6 Yilmaz H, Aydin C, Gul BE. Flexural strength and fracture toughness of dental core ceramics J Prosthet Dent 2007; 98 (2) : 120-8. J. Dent Kim M-J. 40 979 2012 10.1016/j.jdent.2012.08.004 Kim M-J, Oh S-H, Kim J-H, et al. Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains J Dent 2012; 40 (11) : 979-88. Dent. Mater Studart A.R. 23 115 2007 10.1016/j.dental.2005.12.009 Studart AR, Filser F, Kocher P, Lüthy H, Gauckler LJ. Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges Dent Mater 2007; 23 (1) : 115-23. J. Prosthet. Dent Raigrodski A.J. 96 237 2006 10.1016/j.prosdent.2006.08.010 Raigrodski AJ, Chiche GJ, Potiket N, et al. The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study J Prosthet Dent 2006; 96 (4) : 237-44. Int. J. Prosthodont Sailer I. 20 383 2007 Sailer I, Fehér A, Filser F, Gauckler LJ, Lüthy H, Hämmerle CH. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures Int J Prosthodont 2007; 20 (4) : 383-8. Open Dent. J Daou E.E. 8 33 2014 10.2174/1874210601408010033 Daou EE. The zirconia ceramic: strengths and weaknesses Open Dent J 2014; 8 : 33-42. J. Biomed. Mater. Res. B Appl. Biomater Aboushelib M.N. 87 139 2008 10.1002/jbm.b.31083 Aboushelib MN, Feilzer AJ, de Jager N, Kleverlaan CJ. Prestresses in bilayered all-ceramic restorations J Biomed Mater Res B Appl Biomater 2008; 87 (1) : 139-45. Dent. Mater Aboushelib M.N. 22 857 2006 10.1016/j.dental.2005.11.014 Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics Dent Mater 2006; 22 (9) : 857-63. Dent. Mater. J Fischer J. 26 766 2007 10.4012/dmj.26.766 Fischer J, Stawarczyk B, Tomic M, Strub JR, Hämmerle CH. Effect of thermal misfit between different veneering ceramics and zirconia frameworks on in vitro fracture load of single crowns Dent Mater J 2007; 26 (6) : 766-72. Dent. Mater. J Fischer J. 27 448 2008 10.4012/dmj.27.448 Fischer J, Grohmann P, Stawarczyk B. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites Dent Mater J 2008; 27 (3) : 448-54. J. Oral Rehabil de Kler M. 34 841 2007 10.1111/j.1365-2842.2006.01675.x de Kler M, de Jager N, Meegdes M, van der Zel JM. Influence of thermal expansion mismatch and fatigue loading on phase changes in porcelain veneered Y-TZP zirconia discs J Oral Rehabil 2007; 34 (11) : 841-7. Dent. Mater Wang H. 24 633 2008 10.1016/j.dental.2007.06.030 Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks Dent Mater 2008; 24 (5) : 633-8. J. Prosthodont Aboushelib M.N. 17 401 2008 10.1111/j.1532-849X.2008.00306.x Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Effect of zirconia type on its bond strength with different veneer ceramics J Prosthodont 2008; 17 (5) : 401-8. J. Mater. Sci. Mater. Med Rahaman M.N. 19 2325 2008 10.1007/s10856-007-3328-7 Rahaman MN, Li Y, Bal BS, Huang W. Functionally graded bioactive glass coating on magnesia partially stabilized zirconia (Mg-PSZ) for enhanced biocompatibility J Mater Sci Mater Med 2008; 19 (6) : 2325-33. Dent. Mater Stawarczyk B. 27 1045 2011 10.1016/j.dental.2011.07.006 Stawarczyk B, Özcan M, Roos M, Trottmann A, Sailer I, Hämmerle CH. Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques Dent Mater 2011; 27 (10) : 1045-53. Dent. Mater Aboushelib M.N. 21 984 2005 10.1016/j.dental.2005.03.013 Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations Dent Mater 2005; 21 (10) : 984-91. Quintessence Int Kern M. 36 141 2005 Kern M. Clinical long-term survival of two-retainer and single-retainer all-ceramic resin-bonded fixed partial dentures Quintessence Int 2005; 36 (2) : 141-7. J. Prosthet. Dent Albashaireh Z.S. 104 105 2010 10.1016/S0022-3913(10)60102-3 Albashaireh ZS, Ghazal M, Kern M. Two-body wear of different ceramic materials opposed to zirconia ceramic J Prosthet Dent 2010; 104 (2) : 105-13. Dent. Mater Heintze S.D. 24 433 2008 10.1016/j.dental.2007.06.016 Heintze SD, Cavalleri A, Forjanic M, Zellweger G, Rousson V. Wear of ceramic and antagonist--a systematic evaluation of influencing factors in vitro. Dent Mater 2008; 24 (4) : 433-49. Glossary of prosthodontic terms. 1999. J. Prosthet. Dent Oh W.S. 87 536 2002 10.1067/mpr.2002.123850 Oh WS, Anusavice KJ. Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures J Prosthet Dent 2002; 87 (5) : 536-42. Kaidonis JA, Towsend G, Tansley GD. Wear of human enamel: a quantitative in vitro assessment. J Den Res 1998; pp. 771983-90. Callister WD Jr. Materials science and engineering: an introduction. New York: John Wiley & Sons 1997; pp. 179-95. Larsen MJ. Chemical events during tooth dissolution J Den Res 1990; 69(575-80; discussion 634-6.) Int. J. Prosthodont Yip K.H. 17 350 2004 Yip KH, Smales RJ, Kaidonis JA. Differential wear of teeth and restorative materials: clinical implications Int J Prosthodont 2004; 17 (3) : 350-6. J. Prosthet. Dent Kelly J.R. 62 536 1989 10.1016/0022-3913(89)90075-9 Kelly JR, Campbell SD, Bowen HK. Fracture-surface analysis of dental ceramics J Prosthet Dent 1989; 62 (5) : 536-41. J. Dent. Res Morena R. 65 993 1986 10.1177/00220345860650071901 Morena R, Beaudreau GM, Lockwood PE, Evans AL, Fairhurst CW. Fatigue of dental ceramics in a simulated oral environment J Dent Res 1986; 65 (7) : 993-7. J. Prosthet. Dent Oh W-S. 87 451 2002 10.1067/mpr.2002.123851 Oh W-S, Delong R, Anusavice KJ. Factors affecting enamel and ceramic wear: a literature review J Prosthet Dent 2002; 87 (4) : 451-9. J. Dent Piddock V. 17 290 1989 10.1016/0300-5712(89)90042-0 Piddock V. Effect of alumina concentration on the thermal diffusivity of dental porcelain J Dent 1989; 17 (6) : 290-4. J. Prosthet. Dent Magne P. 82 669 1999 10.1016/S0022-3913(99)70008-9 Magne P, Oh WS, Pintado MR, DeLong R. Wear of enamel and veneering ceramics after laboratory and chairside finishing procedures J Prosthet Dent 1999; 82 (6) : 669-79. Dent. Mater DeLong R. 2 214 1986 10.1016/S0109-5641(86)80016-1 DeLong R, Douglas WH, Sakaguchi RL, Pintado MR. The wear of dental porcelain in an artificial mouth Dent Mater 1986; 2 (5) : 214-9. J. Prosthet. Dent Jacobi R. 66 303 1991 10.1016/0022-3913(91)90254-T Jacobi R, Shillingburg HT Jr, Duncanson MG Jr. A comparison of the abrasiveness of six ceramic surfaces and gold J Prosthet Dent 1991; 66 (3) : 303-9. J. Dent. Res Seghi R.R. 70 221 1991 10.1177/00220345910700031301 Seghi RR, Rosenstiel SF, Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J Dent Res 1991; 70 (3) : 221-5. Dent. Mater Mecholsky J.J. 11 111 1995 10.1016/0109-5641(95)80044-1 Mecholsky JJ Jr. Fracture mechanics principles Dent Mater 1995; 11 (2) : 111-2. Acta Odontol. Scand Ekfeldt A. 51 99 1993 10.3109/00016359309041154 Ekfeldt A, Fransson B, Söderlund B, Oilo G. Wear resistance of some prosthodontic materials in vivo. Acta Odontol Scand 1993; 51 (2) : 99-107. Callister WD Jr. Materials science and engineering: an introduction. New York: John Wiley & Sons 1997; pp. 179-95. J. Biomech Zhang D. 41 2995 2008 10.1016/j.jbiomech.2008.07.019 Zhang D, Lu C, Zhang X, Mao S, Arola D. Contact fracture of full-ceramic crowns subjected to occlusal loads J Biomech 2008; 41 (14) : 2995-3001. Dent. Mater Mitov G. 28 909 2012 10.1016/j.dental.2012.04.010 Mitov G, Heintze SD, Walz S, Woll K, Muecklich F, Pospiech P. Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures Dent Mater 2012; 28 (8) : 909-18. Dent. Mater Taskonak B. 24 1149 2008 10.1016/j.dental.2008.01.004 Taskonak B, Borges GA, Mecholsky JJ Jr, Anusavice KJ, Moore BK, Yan J. The effects of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic Dent Mater 2008; 24 (9) : 1149-55. J. Prosthet. Dent Ghazal M. 101 342 2009 10.1016/S0022-3913(09)60068-8 Ghazal M, Kern M. The influence of antagonistic surface roughness on the wear of human enamel and nanofilled composite resin artificial teeth J Prosthet Dent 2009; 101 (5) : 342-9. J. Prosthodont. Res Johansson A. 55 127 2011 10.1016/j.jpor.2011.02.004 Johansson A, Omar R, Carlsson GE. Bruxism and prosthetic treatment: a critical review J Prosthodont Res 2011; 55 (3) : 127-36. J. Prosthet. Dent Ramp M.H. 77 523 1997 10.1016/S0022-3913(97)70146-X Ramp MH, Suzuki S, Cox CF, Lacefield WR, Koth DL. Evaluation of wear: enamel opposing three ceramic materials and a gold alloy J Prosthet Dent 1997; 77 (5) : 523-30. J. Oral Rehabil Ekfeldt A. 17 117 1990 10.1111/j.1365-2842.1990.tb01400.x Ekfeldt A, Oilo G. Wear of prosthodontic materials--an in vivo study J Oral Rehabil 1990; 17 (2) : 117-29. Oper. Dent Graf K. 27 167 2002 Graf K, Johnson GH, Mehl A, Rammelsberg P. The influence of dental alloys on three-body wear of human enamel and dentin in an inlay-like situation Oper Dent 2002; 27 (2) : 167-74. J. Adhes. Dent Hickel R. 3 45 2001 Hickel R, Manhart J. Longevity of restorations in posterior teeth and reasons for failure J Adhes Dent 2001; 3 (1) : 45-64. J. Dent. Res O’Sullivan E.T. 77 692 1998 O’Sullivan ET, Setchell D. Two-body method for testing tooth wear by restorative materials J Dent Res 1998; 77 : 692. [abstract 484]. J. Prosthet. Dent Metzler K.T. 81 356 1999 10.1016/S0022-3913(99)70280-5 Metzler KT, Woody RD, Miller AW III, Miller BH. In vitro investigation of the wear of human enamel by dental porcelain J Prosthet Dent 1999; 81 (3) : 356-64. Dent. Mater Esquivel-Upshaw J.F. 28 615 2012 10.1016/j.dental.2012.02.001 Esquivel-Upshaw JF, Rose WF Jr, Barrett AA, et al. Three years in vivo wear: core-ceramic, veneers, and enamel antagonists Dent Mater 2012; 28 (6) : 615-21. J. Prosthet. Dent Derand P. 81 460 1999 10.1016/S0022-3913(99)80014-6 Derand P, Vereby P. Wear of low-fusing dental porcelains J Prosthet Dent 1999; 81 (4) : 460-3. J. Prosthet. Dent Ratledge D.K. 72 194 1994 10.1016/0022-3913(94)90080-9 Ratledge DK, Smith BG, Wilson RF. The effect of restorative materials on the wear of human enamel J Prosthet Dent 1994; 72 (2) : 194-203. J. Prosthet. Dent al-Hiyasat A.S. 82 476 1999 10.1016/S0022-3913(99)70037-5 al-Hiyasat AS, Saunders WP, Smith GM. Three-body wear associated with three ceramics and enamel J Prosthet Dent 1999; 82 (4) : 476-81. Dent. Mater Heintze S.D. 24 433 2008 10.1016/j.dental.2007.06.016 Heintze SD, Cavalleri A, Forjanic M, Zellweger G, Rousson V. Wear of ceramic and antagonist--a systematic evaluation of influencing factors in vitro Dent Mater 2008; 24 (4) : 433-49. J. Prosthodont. Res Hatta M. 55 146 2011 10.1016/j.jpor.2010.10.005 Hatta M, Shinya A, Yokoyama D, Gomi H, Vallittu PK, Shinya A. The effect of surface treatment on bond strength of layering porcelain and hybrid composite bonded to zirconium dioxide ceramics J Prosthodont Res 2011; 55 (3) : 146-53. J. Dent Vaidyanathan J. 29 545 2001 10.1016/S0300-5712(01)00049-5 Vaidyanathan J, Vaidyanathan TK. Flexural creep deformation and recovery in dental composites J Dent 2001; 29 (8) : 545-51. Jpn. Dent. Sci. Rev Komine F. 48 153 2012 10.1016/j.jdsr.2012.06.001 Komine F, Strub J, Matsumura H. Bonding between layering materials and zirconia frameworks Jpn Dent Sci Rev 2012; 48 : 153-61. J. Oral Rehabil Kohyama K. 31 327 2004 10.1046/j.1365-2842.2003.01248.x Kohyama K, Hatakeyama E, Sasaki T, Azuma T, Karita K. Effect of sample thickness on bite force studied with a multiple-point sheet sensor J Oral Rehabil 2004; 31 (4) : 327-34. J. Prosthodont. Res Johansson A. 55 127 2011 10.1016/j.jpor.2011.02.004 Johansson A, Omar R, Carlsson GE. Bruxism and prosthetic treatment: a critical review J Prosthodont Res 2011; 55 (3) : 127-36. Dent. Mater Heintze S.D. 22 146 2006 10.1016/j.dental.2005.04.013 Heintze SD, Forjanic M, Rousson V. Surface roughness and gloss of dental materials as a function of force and polishing time in vitro. Dent Mater 2006; 22 (2) : 146-65. Acta Odontol. Scand Stawarczyk B. 71 102 2013 10.3109/00016357.2011.654248 Stawarczyk B, Özcan M, Schmutz F, Trottmann A, Roos M, Hämmerle CH. Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists Acta Odontol Scand 2013; 71 (1) : 102-12. J. Biomed. Mater. Res Kumar P. 25 813 1991 10.1002/jbm.820250703 Kumar P, Oka M, Ikeuchi K, et al. Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy J Biomed Mater Res 1991; 25 (7) : 813-28. Dent. Mater Preis V. 27 796 2011 10.1016/j.dental.2011.04.001 Preis V, Behr M, Kolbeck C, Hahnel S, Handel G, Rosentritt M. Wear performance of substructure ceramics and veneering porcelains Dent Mater 2011; 27 (8) : 796-804. Tambra TR, Razzog M, Lang BR, Wang R-F, Lang BE. Wear of enamel opposing YPSZ zirconia core material with two surface finish In: 32nd AADR. 2003. Abstr. No. 0915 Culver S, Cakir D, Burgess J, Ramp L. Wear of the enamel antagonist and five restorative materials In: 37th AADR. 2008. Abstr. No. 0367 J. Prosthet. Dent Albashaireh Z.S. 104 105 2010 10.1016/S0022-3913(10)60102-3 Albashaireh ZS, Ghazal M, Kern M. Two-body wear of different ceramic materials opposed to zirconia ceramic J Prosthet Dent 2010; 104 (2) : 105-13. Sorensen JA, Sultan E, Sorensen PN. Three-body wear of enamel against full crown ceramics In: 89th IADR. 2011. Abstr. No. 1652 Basunbul G, Nathanson D. Human enamel wear against four dental ceramics in vitro In: 89th IADR. 2011. Abstr. No. 1650 Acta Odontol. Scand Stawarczyk B. 71 102 2013 10.3109/00016357.2011.654248 Stawarczyk B, Özcan M, Schmutz F, Trottmann A, Roos M, Hämmerle CH. Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists Acta Odontol Scand 2013; 71 (1) : 102-12. Yang DH, Park J, Yang HS, et al. Antagonist enamel wear to 3 CAD/CAM full contour zirconia ceramics In: 90th IADR. 2012. Abstr. No. 1381 Shar S, Mickelson C, Beck P, Lamp LC, Cakir D, Burgess J. Wear of enamel on polished and glazed zirconia In: 39th AADR. 2010. Abstr. No. 227 J. Adv. Prosthodont Jung Y-S. 2 111 2010 10.4047/jap.2010.2.3.111 Jung Y-S, Lee J-W, Choi Y-J, Ahn J-S, Shin S-W, Huh J-B. A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain J Adv Prosthodont 2010; 2 (3) : 111-5. Kuretzky T, Urban M, Dittmann R, Peez R, Mecher E. Wear behaviour of zirconia compared to state-of-the-art ceramics In: 89th IADR. 2011. Abstr. No. 3055 Acta Odontol. Scand Kontos L. 71 482 2013 10.3109/00016357.2012.696690 Kontos L, Schille C, Schweizer E, Geis-Gerstorfer J. Influence of surface treatment on the wear of solid zirconia Acta Odontol Scand 2013; 71 (3-4) : 482-7. J. Prosthet. Dent Janyavula S. 109 22 2013 10.1016/S0022-3913(13)60005-0 Janyavula S, Lawson N, Cakir D, Beck P, Ramp LC, Burgess JO. The wear of polished and glazed zirconia against enamel J Prosthet Dent 2013; 109 (1) : 22-9. Denry I, Kelly JR. 2014. J. Prosthodont Passos S. 12179 2014 10.1111/jopr Passos S, Nychka JA, Major P, Linke B, Flores-Mir C. In vitro fracture toughness of commercial Y-TZP ceramics: A systematic review J Prosthodont 2014; 12179 [Epub ahead of print]. J. Prosthodont Passos S.P. 23 593 2014 10.1111/jopr.12167 Passos SP, Torrealba Y, Major P, Linke B, Flores-Mir C, Nychka JA. In vitro wear behavior of zirconia opposing enamel: a systematic review J Prosthodont 2014; 23 (8) : 593-601. [Epub ahead of print]. Dentistry-Ceramic Materials ISO. 2008. Int. J. Prosthodont Tinschert J. 14 231 2001 Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study Int J Prosthodont 2001; 14 (3) : 231-8. Mehl A. J. Periodontol Kleinfelder J.W. 73 1184 2002 10.1902/jop.2002.73.10.1184 Kleinfelder JW, Ludwigt K. Maximal bite force in patients with reduced periodontal tissue support with and without splinting J Periodontol 2002; 73 (10) : 1184-7. J. Dent. Res Fontijn-Tekamp F.A. 79 1519 2000 10.1177/00220345000790071501 Fontijn-Tekamp FA, Slagter AP, Van Der Bilt A, et al. Biting and chewing in overdentures, full dentures, and natural dentitions J Dent Res 2000; 79 (7) : 1519-24. Annu. Rev. Mater. Sci Kelly J.R. 27 443 1997 10.1146/annurev.matsci.27.1.443 Kelly JR. Ceramics in restorative and prosthetic dentistry Annu Rev Mater Sci 1997; 27 : 443-68. J. Prosthet. Dent Kinsel R.P. 101 388 2009 10.1016/S0022-3913(09)60083-4 Kinsel RP, Lin D. Retrospective analysis of porcelain failures of metal ceramic crowns and fixed partial dentures supported by 729 implants in 152 patients: patient-specific and implant-specific predictors of ceramic failure J Prosthet Dent 2009; 101 (6) : 388-94. Dahl B, Ølio G. 1996. J. Oral Rehabil Johansson A. 35 548 2008 10.1111/j.1365-2842.2008.01897.x Johansson A, Johansson A-K, Omar R, Carlsson GE. Rehabilitation of the worn dentition J Oral Rehabil 2008; 35 (7) : 548-66. Dent. Mater Rekow E.D. 22 125 2006 10.1016/j.dental.2005.04.010 Rekow ED, Harsono M, Janal M, Thompson VP, Zhang G. Factorial analysis of variables influencing stress in all-ceramic crowns Dent Mater 2006; 22 (2) : 125-32. J. Biomed. Mater. Res. B Appl. Biomater Tinschert J. 80 317 2007 10.1002/jbm.b.30599 Tinschert J, Natt G, Mohrbotter N, Spiekermann H, Schulze KA. Lifetime of alumina- and zirconia ceramics used for crown and bridge restorations J Biomed Mater Res B Appl Biomater 2007; 80 (2) : 317-21. Eur. J. Oral Sci Schley J-S. 118 443 2010 10.1111/j.1600-0722.2010.00767.x Schley J-S, Heussen N, Reich S, Fischer J, Haselhuhn K, Wolfart S. Survival probability of zirconia-based fixed dental prostheses up to 5 yr: a systematic review of the literature Eur J Oral Sci 2010; 118 (5) : 443-50. J. Prosthet. Dent Raigrodski A.J. 92 557 2004 10.1016/j.prosdent.2004.09.015 Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature J Prosthet Dent 2004; 92 (6) : 557-62. Dent. Update Eccles J.D. 9 373 1982 Eccles JD. Tooth surface loss from abrasion, attrition and erosion Dent Update 1982; 9 (7) : 373-374, 376-378, 380-381. Br. Dent. J Mehta S.B. 212 17 2012 10.1038/sj.bdj.2011.1099 Mehta SB, Banerji S, Millar BJ, Suarez-Feito JM. Current concepts on the management of tooth wear: part 1. Assessment, treatment planning and strategies for the prevention and the passive management of tooth wear Br Dent J 2012; 212 (1) : 17-27. Br. Dent. J Bartlett D.W. 194 211 2003 10.1038/sj.bdj.4809914 Bartlett DW. Retrospective long term monitoring of tooth wear using study models Br Dent J 2003; 194 (4) : 211-3. Dent. Mater Heintze S.D. 28 961 2012 10.1016/j.dental.2012.04.006 Heintze SD, Faouzi M, Rousson V, Ozcan M. Correlation of wear in vivo and six laboratory wear methods Dent Mater 2012; 28 (9) : 961-73. J. Mech. Behav. Biomed. Mater Mörmann W.H. 20 113 2013 10.1016/j.jmbbm.2013.01.003 Mörmann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness J Mech Behav Biomed Mater 2013; 20 : 113-25. J. Prosthet. Dent Conrad H.J. 98 389 2007 10.1016/S0022-3913(07)60124-3 Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: a systematic review J Prosthet Dent 2007; 98 (5) : 389-404. J. Oral Rehabil Bayne S.C. 34 921 2007 10.1111/j.1365-2842.2007.01812.x Bayne SC. Dental restorations for oral rehabilitation - testing of laboratory properties versus clinical performance for clinical decision making J Oral Rehabil 2007; 34 (12) : 921-32. Dent. Mater Denry I. 24 299 2008 10.1016/j.dental.2007.05.007 Denry I, Kelly JR. State of the art of zirconia for dental applications Dent Mater 2008; 24 (3) : 299-307. J. Prosthodont. Res Carlsson G.E. 53 3 2009 10.1016/j.jpor.2008.08.003 Carlsson GE. Critical review of some dogmas in prosthodontics J Prosthodont Res 2009; 53 (1) : 3-10. J. Dent. Res DeLong R. 62 32 1983 10.1177/00220345830620010801 DeLong R, Douglas WH. Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control J Dent Res 1983; 62 (1) : 32-6. J. Dent. Res Seligman D.A. 67 1323 1988 10.1177/00220345880670101601 Seligman DA, Pullinger AG, Solberg WK. The prevalence of dental attrition and its association with factors of age, gender, occlusion, and TMJ symptomatology J Dent Res 1988; 67 (10) : 1323-33. Community Dent. Oral Epidemiol Creugers N.H. 22 448 1994 10.1111/j.1600-0528.1994.tb00795.x Creugers NH, Käyser AF, van ’t Hof MA, van't Hof MA. A meta-analysis of durability data on conventional fixed bridges Community Dent Oral Epidemiol 1994; 22 (6) : 448-52. QDT Ban S. 32 1240 2012 Ban S. Polishing of zirconia full contour restoratives and antagonist wear QDT 2012; 32 : 1240-54. Int. J. Prosthodont Sailer I. 22 553 2009 Sailer I, Gottnerb J, Kanelb S, Hämmerle CH. Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: a 3-year follow-up Int J Prosthodont 2009; 22 (6) : 553-60.