TODENTJ-25-03-2019_TODENTJ-7-118 1553505476 Bentham Open doi@benthamopen.net Bentham Open The Open Dentistry Journal TODENTJ 1874-2106 9 6 2013 7 1 Christine Dirxen Uwe Blunck Saskia Preissner Background: The development of ceramics during the last years was overwhelming. However, the focus was laid on the hardness and the strength of the restorative materials, resulting in high antagonistic tooth wear. This is critical for patients with bruxism. Objectives: The purpose of this study was to evaluate the clinical performance of the new double hybrid material for non-invasive treatment approaches. Material and Methods: The new approach of the material tested, was to modify ceramics to create a biomimetic material that has similar physical properties like dentin and enamel and is still as strong as conventional ceramics. Results: The produced crowns had a thickness ranging from 0.5 to 1.5 mm. To evaluate the clinical performance and durability of the crowns, the patient was examined half a year later. The crowns were still intact and soft tissues appeared healthy and this was achieved without any loss of tooth structure. Conclusions: The material can be milled to thin layers, but is still strong enough to prevent cracks which are stopped by the interpenetrating polymer within the network. Depending on the clinical situation, minimally- up to non-invasive restorations can be milled. Clinical Relevance: Dentistry aims in preservation of tooth structure. Patients suffering from loss of tooth structure (dental erosion, Amelogenesis imperfecta) or even young patients could benefit from minimally-invasive crowns. Due to a Vickers hardness between dentin and enamel, antagonistic tooth wear is very low. This might be interesting for treating patients with bruxism. 9 6 2013 118 122 TODENTJ-7-118 1 10.2174/crossmark_policy opendentistryjournal.com benthamopen.com true Peer Reviewed Single blind Checked with iThenticate 2013-4-12 2013-7-30 2013-8-2 2013-9-6 http://creativecommons.org/licenses/by-nc/3.0/ 10.2174/1874210620130904003 1553505476 https://opendentistryjournal.com/VOLUME/7/PAGE/118/ https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.pdf https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.pdf https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.pdf https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.pdf https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.pdf https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.pdf https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.pdf https://opendentistryjournal.com/contents/volumes/V7/TODENTJ-7-118/TODENTJ-7-118.xml J Oral Rehabil Attin T 39 73 2012 Attin T, Filli T, Imfeld C, Schmidlin PR. Composite vertical bite reconstructions in eroded dentitions after 5. years: a case series J Oral Rehabil 2012; 39 : 73-9. Dent Mater Coldea A 29 419 2013 Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials: official publication of the Academy of Dental Materials Dent Mater 2013; 29 : 419-26. Oper Dent Alonso V 37 432 2012 Alonso V, Caserio M. A clinical study of direct composite full-coverage crowns: long-term results Oper Dent 2012; 37 : 432-1. Quintessence Int Preissner S 44 303 2013 Preissner S, Kostka E, Blunck U. A noninvasive treatment of amelogenesis imperfecta Quintessence Int 2013; 44 : 303-5. J Esthet Restor Dent Guth JF 24 310 2012 Guth JF, Almeida ESJS, Ramberger M, Beuer F, Edelhoff D. Treatment concept with CAD/CAM-fabricated high-density polymer temporary restorations J Esthet Restor Dent 2012; 24 : 310-8. J Dent Res Hayashi M 87 762 2008 Hayashi M, Koychev EV, Okamura K. Heat treatment strengthens human dentin J Dent Res 2008; 87 : 762-6. Dent Mater Plotino G 23 1129 2007 Plotino G, Grande NM, Bedini R, Pameijer CH, Somma F. Flexural properties of endodontic posts and human root dentin : official publication of the Academy of Dental Materials Dent Mater 2007; 23 : 1129-35. Braz Dent J Vieira C 23 28 2012 Vieira C, Silva-Sousa YT, Pessarello NM, Rached-Junior FA, Souza-Gabriel AE. Effect of high-concentrated bleaching agents on the bond strength at dentin/resin interface and flexural strength of dentin Braz Dent J 2012; 23 : 28-35. J R Soc Interface Bechtle S 9 1265 2012 Bechtle S, Ozcoban H, Lilleodden ET. Hierarchical flexural strength of enamel: transition from brittle to damage-tolerant behaviour J R Soc Interface 2012; 9 : 1265-74. J Contemp Dent Pract Ghavamnasiri M 8 21 2007 Ghavamnasiri M, Abedini S, Mehdizadeh Tazangi A. Effect of different time periods of vital bleaching on flexural strength of the bovine enamel and dentin complex J Contemp Dent Pract 2007; 8 : 21-8. Dent Mater Chen YM 24 1506 2008 Chen YM, Smales RJ, Yip KH, Sung WJ. Translucency and biaxial flexural strength of four ceramic core materials : official publication of the Academy of Dental Materials Dent Mater 2008; 24 : 1506-1. Int J Prosthodont Guazzato M 15 339 2002 Guazzato M, Albakry M, Swain MV, Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia Int J Prosthodont 2002; 15 : 339-46. J Dent Tinschert J 28 529 2000 Tinschert J, Zwez D, Marx R, Anusavice KJ. Structural reliability of alumina-. feldsar-.leucite-., mica- and zirconia-based ceramics J Dent 2000; 28 : 529-35. J Am Dent Assoc Giordano R 137 Suppl 14S 2006 Giordano R. Materials for chairside CAD/CAM-produced restorations J Am Dent Assoc 2006; 137 Suppl : 14S-21S. Dent Mater J Fischer J 29 188 2010 Fischer J, Roeske , Stawarczyk B, Hammerle CH. Investigations in the correlation between Martens hardness and flexural strength of composite resin restorative materials Dent Mater J 2010; 29 : 188-92. Dent Mater Ilie N 25 810 2009 Ilie N, Hickel R. Macro-. micro- and nano-mechanical investigations on silorane and methacrylate-based composites: official publication of the Academy of Dental Materials Dent Mater 2009; 25 : 810-9. J Oral Rehabil Leprince J 37 364 2010 Leprince J, Palin WM, Mullier T, Devaux J, Vreven J, Leloup G. Investigating filler morphology and mechanical properties of new low-shrinkage resin composite types J Oral Rehabil 2010; 37 : 364-76. J Biomed Mater Res B Appl Biomater Tinschert J 80 317 2007 Tinschert J, Natt G, Mohrbotter N, Spiekermann H, Schulze KA. Lifetime of alumina- and zirconia ceramics used for crown and bridge restorations J Biomed Mater Res B Appl Biomater 2007; 80 : 317-21. J Prosthet Dent Yilmaz H 98 120 2007 Yilmaz H, Aydin C, Gul BE. Flexural strength and fracture toughness of dental core ceramics J Prosthet Dent 2007; 98 : 120-8. J Endod Lin CL 35 1391 2009 Lin CL, Chang YH, Pa CA. Estimation of the risk of failure for an endodontically treated maxillary premolar with MODP preparation and CAD/CAM ceramic restorations J Endod 2009; 35 : 1391-5. Dent Mater Lohbauer U 24 250 2008 Lohbauer U, Muller FA, Petschelt A. Influence of surface roughness on mechanical strength of resin composite versus glass ceramic materials: official publication of the Academy of Dental Materials Dent Mater 2008; 24 : 250-6. Dent Mater Manojlovic D 27 371 2011 Manojlovic D, Radisic M, Vasiljevic T, Zivkovic S, Lausevic M, Miletic V. Monomer elution from nanohybrid and ormocer-based composites cured with different light sources: official publication of the Academy of Dental Materials Dent Mater 2011; 27 : 371-8. Arch Oral Biol Kinney JH 41 9 1996 Kinney JH, Balooch M, Marshall SJ, Marshall GWJr, Weihs TP. Hardness and Young's modulus of human peritubular and intertubular dentine Arch Oral Biol 1996; 41 : 9-13. J Dent Mahoney E 28 589 2000 Mahoney E, Holt A, Swain M, Kilpatrick N. The hardness and modulus of elasticity of primary molar teeth: an ultra-micro-indentation study J Dent 2000; 28 : 589-94. J Dent Res Xu HH 7 472 1998 Xu HH, Smith DT, Jahanmir S. Indentation damage and mechanical properties of human enamel and dentin J Dent Res 1998; 7 : 472-80. Dent Mater Fischer H 7 289 2001 Fischer H, Dautzenberg G, Marx R. Nondestructive estimation of the strength of dental ceramic materials: official publication of the Academy of Dental Materials Dent Mater 2001; 7 : 289-95. Dent Mater Lazar DR 24 1676 2008 Lazar DR, Bottino MC, Ozcan M. Y-TZP ceramic processing from coprecipitated powders a comparative study with three commercial dental ceramics: official publication of the Academy of Dental Materials Dent Mater 2008; 24 : 1676-85. Dent Mater Visvanathan A 23 777 2007 Visvanathan A, Ilie N, Hickel R, Kunzelmann KH. The influence of curing times and light curing methods on the polymerization shrinkage stress of a shrinkage-optimized composite with hybrid-type prepolymer fillers: official publication of the Academy of Dental Materials Dent Mater 2007; 23 : 777-84. Arch Oral Biol Cuy JL 47 281 2002 Cuy JL, Mann AB, Livi KJ, Teaford MF, Weihs TP. Nanoindentation mapping of the mechanical properties of human molar tooth enamel Arch Oral Biol 2002; 47 : 281-91. Dent Mater Guazzato M 20 449 2004 Guazzato M, Albakry M, Ringer SP, Swain MV. Strength. fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics: official publication of the Academy of Dental Materials. Dent Mater 2004; 20 : 449-56. J Biomed Mater Res Deng Y 63 137 2002 Deng Y, Lawn BR, Lloyd IK. Characterization of damage modes in dental ceramic bilayer structures J Biomed Mater Res 2002; 63 : 137-45. Dent Mater Flury S 28 521 2012 Flury S, Hayoz S, Peutzfeldt A, Husler J, Lussi A. Depth of cure of resin composites: is the ISO 4049 method suitable for bulk fill materials?.official publication of the Academy of Dental Materials Dent Mater 2012; 28 : 521-8. J Prosthet Dent Albashaireh ZS 104 105 2010 Albashaireh ZS, Ghazal M, Kern M. Two-body wear of different ceramic materials opposed to zirconia ceramic J Prosthet Dent 2010; 104 : 105-3. Clin Oral Investig Rosentritt M 16 935 2012 Rosentritt M, Preis V, Behr M, Hahnel S, Handel G, Kolbeck C. Two-body wear of dental porcelain and substructure oxide ceramics Clin Oral Investig 2012; 16 : 935-43. Clin Oral Investig Palaniappan S 14 441 2010 Palaniappan S, Elsen L, Lijnen I, Peumans M, Van Meerbeek B, Lambrechts P. Three-year randomised clinical trial to evaluate the clinical performance quantitative and qualitative wear patterns of hybrid composite restorations Clin Oral Investig 2010; 14 : 441-58. J Biomed Mater Res B Appl Biomater Schmage P 91 71 2009 Schmage P, Nergiz I, Sito F, Platzer U, Rosentritt M. Wear and hardness of different core build-up materials J Biomed Mater Res B Appl Biomater 2009; 91 : 71-9. J Mech Behav Biomed Mater Mormann WH 20 113 2013 Mormann WH, Stawarczyk B, Ender A, Sener BAt, tin T, Mehl A. Wear characteristics of current aesthetic dental restorative CAD/CAM materials two-body wear gloss retention roughness and Martens hardness J Mech Behav Biomed Mater 2013; 20 : 113-25. J Mech Behav Biomed Mater Preis V 13 2012 Preis V, Behr M, Handel G, Schneider-Feyrer S, Hahnel S, Rosentritt M. Wear performance of dental ceramics after grinding and polishing treatments J Mech Behav Biomed Mater 2012; 13-22. Quintessence Int Krejci I 25 199 1994 Krejci I, Lutz F, Reimer M. Wear of CAD/CAM ceramic inlays: restorations opposing cusps and luting cements Quintessence Int 1994; 25 : 199-207. Oper Dent Barkmeier W 38 226 2013 Barkmeier W, Erickson R, Latta M, Wilwerding T. Wear rates of resin composites Oper Dent 2013; 38 (2) : 226-33. J Dent Yu H 37 913 2009 Yu H, Wegehaupt FJ, Wiegand A, Roos M, Attin T, Buchalla W. Erosion and abrasion of tooth-colored restorative materials and human enamel J Dent 2009; 37 : 913-22. Int J Prosthodont Bindl A 5 451 2002 Bindl A, Mormann WH. An up to 5-year clinical evaluation of posterior in-ceram CAD/CAM core crowns Int J Prosthodont 2002; 5 : 451-6. J Prosthet Dent Uludag B 97 25 2007 Uludag B, Usumez A, Sahin V, Eser K, Ercoban E. The effect of ceramic thickness and number of firings on the color of ceramic systems: an in vitro study J Prosthet Dent 2007; 97 : 25-31. Quintessence Int Atay A 39 603 2008 Atay A, Oruc S, Ozen J, Sipahi C. Effect of accelerated aging on the color stability of feldspathic ceramic treated with various surface treatments Quintessence Int 2008; 39 : 603-9. J Prosthet Dent Kelly JR 5 18 1996 Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives J Prosthet Dent 1996; 5 : 18-32. J Esthet Restor Dent Celik EU 23 179 2011 Celik EU, Aladag A, Turkun LS, Yilmaz G. Color changes of dental resin composites before and after polymerization and storage in water J Esthet Restor Dent 2011; 23 : 179-88. Oper Dent Ergucu Z 33 413 2008 Ergucu Z, Turkun LS, Aladag A. Color stability of nanocomposites polished with one-step systems Oper Dent 2008; 33 : 413-20. Dent Mater Heydecke G 23 785 2007 Heydecke G, Butz F, Binder JR, Strub JR. Material characteristics of a novel shrinkage-free ZrSiO(4) ceramic for the fabrication of posterior crowns official publication of the Academy of Dental Materials Dent Mater 2007; 23 : 785-91. J Prosthet Dent Rinke S 76 343 1996 Rinke S, Huls A. Copy-milled aluminous core ceramic crowns a clinical report J Prosthet Dent 1996; 76 : 343-6. Oper Dent Federlin M 32 251 2007 Federlin M, Krifka S, Herpich M, Hiller KA, Schmalz G. Partial ceramic crowns influence of ceramic thickness preparation design and luting material on fracture resistance and marginal integrity in vitro Oper Dent 2007; 32 : 251-60. Biomaterials Lawn BR 25 2885 2004 Lawn BR, Pajares A, Zhang Y. Materials design in the performance of all-ceramic crowns Biomaterials 2004; 25 : 2885-92. J Prosthet Dent Thompson JY 76 619 1996 Thompson JY, Bayne SC, Heymann HO. Mechanical properties of a new mica-based machinable glass ceramic for CAD/CAM restorations J Prosthet Dent 1996; 76 : 619-23. Med Oral Patol Oral Cir Bucal Hervas-Garcia A 1 E215 2006 Hervas-Garcia A, Martinez-Lozano MA, Cabanes-Vila J, Barjau-Escribano A, Fos-Galve P. Composite resins: a review of the materials and clinical indications Med Oral Patol Oral Cir Bucal 2006; 1 : E215-20. Oper Dent Perez CR 35 375 2010 Perez CR. Alternative technique for class V resin composite restorations with minimum finishing/polishing procedures Oper Dent 2010; 35 : 375-9.